Vertical Plywood Veneer Dryer

30M Double-Tunnel Plywood Wood Veneer Drying Machine

Model No.:XJN-SHD30
Dimension:30m(L)x5.2m(W)x4.7m(H)
Production Capacity:2.8-3.2 m3/H

INQUIRY

Product Details

Product Tags

Double-tunnel plywood veneer drying machine is suitable for the veneer producer which need high production capacity.

Model No.:	XJN-SHD30（Double Tunnel）
Dimensions	30000×5200×4000mm
Raw material	Seamless steel pipes, galvanized pipes, reinforcing bars, color steel rock wool boards
Length of heating zone	28000mm
Length of cooling zone	1000mm
Veneer size	1270×640×（0.9-3.2mm） 1270×850×（0.9-3.2mm）
Moisture of veneers	The moisture content of fresh veneers is approximately 50% to 10%.
Heat source	Heat transfer oil, steam boiler
Drying temperature	30-90℃(adjustable)
Drying capacity	2.8-3.2m³/h
Veneers conveying speed	5000-10000mm/Min
Circulating Fan	2.2kw/set
Exhaust Fan	0.75kw/set
Driving motor	5.5kw/set
Total Power	approx 40.4kw
Power Consumption	approx 40kwh
Remarks	Due to the continuous upgrading of the product, this parameter is for reference only. Please refer to the actual parameters of the product when purchasing.

Advantages of our plywood veneer drying machine:

1.High degree of automation.

It can automatically heat and exhaust the mositure of the veneers,also it can unload the veneers automatically.It saves labor cost ,and it is energy saving.

2.Dry fast and evenly.

The internal unique hot air circulation mode makes the drying line hot air volume is large and there is hot air in each section.

The air volume is uniform, the temperature is uniform, and the circulation mode of counter-current drying is adopted to ensure the rapid drying of veneers and uniform drying quality.

3.Large output.

According to the needs of different users and different materials, the output can reach 1-5 m³/H.

4.Cover small foot spaces.

The vertical design covers a small area, it reduces the working spaces,very suitable for medium-sized veneer producers.

5.Low drying cost

The equipment has high thermal efficiency, low drying cost, and can effectively use waste heat reheating technology by using the company's high efficiency, energy saving and environmental protection heat source series supporting products.

Remarks:

1.The equipment size can be customized according to the actual size of the customer's veneers.

2. The heat source is the hot air drying oven produced by our company. Can also be designed according to customer conditions. (With air energy, wood, electricity, (boiler) steam, oil, gas, thermal oil which can meet the ideal requirements).